Logitech G815 Keyboard on Ubuntu - First Impressions
My beloved HAVIT KB395L keyboard left Ctrl key has started cutting out intermittently. As a developer all my coding revolves around that key saving changes and copy pasting.
This means that my code now breaks with a random
s in there where I
thought I’d saved something, or where I’ve replaced a code block with
CLACKITY, CLACKITY, CLACK, CLACK
When I say beloved that keyboard was just the right mix of mechanical feel without the CLACKITY, CLACKITY, CLACK, CLACK noise of a mechanical keyboard.
Check out this video from TaeKeyboards on the HAVIT KB309L so you can get an idea of the sound of the keys.
Expand to watch.
The video goes into depth on the switch used for the keyboard which is a low profile Kailh switch, see this section for an explanation of how they work compared to normal switches.
Expand to watch.
This switch is what I’ve been looking for, ever since getting the HAVIT KB395L and finding that keyboards with this switch are very hard to come by.
Ok, time to stop ruminating on the keyboaard (as it’s not healthy)! Time to move on, but where to? I mentioned earlier I’ve bee finding it really difficult to find those switches in any other keyboards anywhere.
Well, in these sorts of situations I’ll go where I always go, YouTube! After searching for loads of low profile boards I kept coming across the Logitech G815, the switches looked similar and from watching videos of review on it they sounded similar too.
At £140 it wasn’t a decision I’d make lightly (reduced from £170 though!) but the left Ctrl key situation was quite disruptive to my flow so I had to go in!
I know the next shipment of the HAVIT KB395L will be arriving in November with an increased price tag now, from £85 what I initially paid to £137 as they know they’re onto a winner with this and it’s popularity.
The box for the board was LARGE! Then getting the actual board out of the box I understand why.
Comparison with the HAVIT box on top on the G815 box:
They keycaps have a nice matt finish, time will tell on how long it will be before the finish wears off to leave shiny buttons. I’m fine with that by the way.
The buttons for the presets at the top, along withe the brightness switch and game mode switch add a good 25mm to the top of the board.
That along with the G switches on the left of the board all add up to quite a larger footprint that my previous board.
That been said the keys feel exactly the same, maybe a bit firmer but it’s that really nice crisp click that I like.
Super thin! This was one of the big draws for me, it is thinner than my last keyboaard. If you like to have the keyboaard elevated there’s two settings to lift the back of the board.
Weighty! It has a considerable weight to it coming in at over 1kg giving it a nice premium feel.
Lights! I would like to say that RGB lighting on a keyboard isn’t important to me but after initially plugging in the G815 and having the initial setting of rainbow cycle set I immediately tried to change to to something solid.
There wasn’t any presets that were solid so I put the light setting to 0 and then couldn’t make out the keys on the board as it was completley blank.
My touch typing isn’t great so I had to set it to one of the least annoying presets until I figured out how to change them.
Any key, or key combination used in my usual workflow which involves keys on the left hand side of the board, like Alt Tab, the backtick key, Ctrl all have these G keys next to them.
This is something I’m gong to have to get used to where my fingers usually hover on the left hand side of the board.
Alt+Tab I was instead pressing Super+G2, getting the Ctrl and Super key mixed up due to the additional keys on the side means I have to consiously find the groove between the G keys with my pinky before typing.
Logitech have management software for the G815 with the Logitech G Hub which is available for Windows and macOS users, but as I’m a Linux users that’s no help to me! 🙃
I had to add a PPA to install libratbag:
sudo add-apt-repository ppa:libratbag-piper/piper-libratbag-gitsudo apt-get updatesudo apt install ratbagd
Then there was a GUI to use called Piper which I installed from the Ubuntu software manager.
Opening Piper I’m greeted with an image of a mouse holding a 404 sign. So it looked like the software wasn’t working until I tried changing the profiles and saw the lights changing.
I added my preferred colour I wanted for the keys clicked apply and nothing happened, it wasn’t until I switched profiles that I noticed the changes taking effect.
I did find that you can change the lighting in the G in the top left of the keyboard to be a different colour or off all together. I decided to keep it the same as the keys as it looked a bit out of place with the lights turned off.
I really like having the media controls above the number pad, yes I like the number pad.
The volume roller is awesome too, has a real nice feel to it with no lag between rolling it and the volume being adjusted on the system.
The keycaps are nice but what I find strange is that the characters on the board are no illuminated like the letters making it a little harder to scan the board visually to find them.
From reading up on the issue linked on the Reddit post it does seem like I can assign different keys or nothing to the G keys.
For now at least I think I’ll try live with them as is, although the G5 key is mapped to F5 so it may get annoying.